 Back to homepage | | |
|
RECORD POWER TOOLS MT1 4 Prong 7/8" Woodturning lathe Drive MT 1 CWA80
|
) 
Item specifics | ||||
|
Endless Green Group Ltd | Visit my eBay Shop |  |
Shop categories
|
Record Power Morse Taper 1 (MT1 / MK1)
4 Prong Drive 7/8" Diameter
(Part number CWA80)
Slightly Shop Soiled, never used and brand new!
These woodturning drives will fit any lathe with a morse taper size 1 (MT1) fitting. We have a limited number of the Record Power woodturning drives in stock.
These drives are all brand new and never been used, they are just old stock and some are very slightly tarnished and some are not in the original Record packets, because of this we have decided to list them as used, but they are all brand new!
Reduced to clear, these drives were £15.00 each
Endless Green Group Ltd is an established family business, registered in England & Wales No 7836553. We offer a fast and friendly service, we sell a range of over 30,000 different products at competitive prices. Buy with confidence; check out our excellent customer feedback. All our products can be found listed in our Ebay shop. A VAT invoice is included with every sale. We have a huge wide range of woodturning items from sanding sealer, dyes, waxes, finishes, pen kits, drive centres, live centres, chisels, lathes, bandsaws, circular saws, dust extractors, belt sanders, grinders as well as excellent range of Woodturning Smocks and that's just to name a few! All items shown below are listed in our Ebay Shop
Planet plus / Rotur Specialist woodturning products  Planet / Rotur Woodturning Drive Centre
Planet Plus / Rutor woodturning drive centres are excellent quality - made from high grade - tough EN8 steel
Code Morse Head Prongs 3821 MT1 3/8 2 3841 MT1 3/8 4 5821 MT1 5/8 2 5841 MT1 5/8 4 0121 MT1 1” 2 0141 MT1 1” 4 3822 MT2 3/8 2 3842 MT2 3/8 4 5822 MT2 5/8 2 5842 MT2 5/8 4 0122 MT2 1” 2 0142 MT2 1” 4 11222R MT2 1½” 2 11242R MT2 1½” 4 All the drives listed above and many more can be found listed in our Ebay Shop
Planet plus / Rotur Specialist woodturning products Hollow Ring Centre Morse Taper sizes 1 & 2
5/8" head with 5/16" bore with removable centre point for long hole boring, may also be used as a tail centre. A "Hollow Ring Centre" can be used as a drive in the headstock to help stop wood from splitting, where a normal 2 or 4 prong drive would risk splitting the wood. Although primarily a Hollow Ring centre is used in the tailstock for boring out a hole up the centre of the workpiece. The boring process is basicly, remove the centre point of the drive (using the allen key provided) and the workpiece is bored out from behind (through) the hollow tailstock, the boring is done whilst the lathe is turning, you could use either a long thin gouge or a long drill bit (these are not included!). A Hollow Ring Centre is not something that most turners would use everyday, but its a must have item when you want to bore a hole up the centre of the workpiece, for example a hole for electrical cable to go through when making a lamp.
Planet plus / Rotur Specialist woodturning products
Drill Chuck Mandrel To fit a threaded Drill chuck in a lathe
Woodturning Smock
Colour: Bottle Green
(other colour Smocks & Aprons are also available from our Ebay Shop) 
 Abrasive Wood Finishing pads Free postage Grey - Super fine 000 grade Red - Fine 00 grade Green - Medium 0 grade Each abrasive pad measures 115mm x 90mm (approx size) Abrasive finishing pads are made from a woven synthetic wire wool, they are very flexible, extremely tough and long lasting. These abrasive hand finishing pads are made from a mildly abrasive synthetic wire wool especially made for final sanding of wood prior to waxing, oiling, varnishing or painting. The pads are very flexible and this flexibility makes them excellent for rubbing down mouldings, door panels, carvings and for woodturning. When the pads get clogged with fine dust, just wash the pad in water and reuse them, time and time again until they are completely worn away. These abrasive pads can be used both wet & dry. For woodturning, I find these pads are very good for final sanding inside bowls where normal 0000 wire wool may not be desirable (especially if the item is being sold or intended for food use) The pads are also useful for sanding spindle work like penmaking. The abrasive pads are equally suitable for use on other materials like plastics, metals, plaster, fillers, masonry, pottery and ceramics etc. We have many trade customers who use these abrasive pads for rubbing down plaster covings and mouldings. We also have these abrasive pads listed in single grade, multi packs in our Ebay Shop   
 
Liberon Tack Cloths
Pack of 10 Cloths 
Liberon tack cloths are excellent for removing dust from all surfaces. Although I only use these myself when woodturning - prior to applying sanding sealer, stains or finishes. I have found that if you don’t use a tack cloth then you just trap microscopic dust particles under your final finish and spoil the overall finish on close inspection. Whilst you can use a damp cloth to remove dust, a damp cloth will raise the grain slightly, which you need to sand back down and this defeats the purpose. These Tack Cloths each come in their own sealed plastic bag, so you only use one cloth at a time and the rest stay fresh. Each cloth is reusable time and time again, I put it back in the bag after use to stop it gathering dust and one tack cloth will last me a long time. Liberon Woodturners Safety Cloth
Pack of 10 Large size cloths approx 12 ½" x 13 ½"
Applying finishes, waxes or buffing on a lathe has always been a good way to get a great finish. However, with normal cloths, there is always the danger that some threads get caught in the chuck and trapping your fingers or hand, this could and does happen, this can mean the loss of a finger or even worse, as a woodturner myself I know from experence how easily it can happen. These safety cloths have the characteristics of a fine buffing cloth, but are especially made to tear very easily should it get entangled in the chuck or other moving parts, therefore reducing the risk of entrapping fingers. Use the cloth to apply dyes, waxes and other finishes or to simply buff the wood while it's still turning on the lathe. It’s just not worth the risk to use normal cotton cloths, as you only need a accident to happen once! 13mm capacity, heavy duty Chuck With a choice of either Morse taper size 1 or 2 fitting included
 Supplied complete with a Chuck Key and Standard Morse Taper 1 or MT2 Arbor. if you are not sure just send us a message via Ebay messages and we can help you get the right tool. A good quality, general purpose Heavy Duty Chuck suitable for Engineering and Woodturning Lathes. The jaws will grip up to 13mm and close down to grip very small drill bits. We also have available in our Ebay Shop a wide range of Planet / Rotur specialist woodturning items, a few are shown below as examples Planet plus / Rotur Specialist woodturning products         
All items shown are listed in our Ebay Shop       We also sell in our Ebay Shop Work, Craft aprons and Woodturning Smocks Some of our aprons and smocks are shown below Our prices includes embroidery of your name etc These aprons are made in the UK and are really excellent quality, they are ideal for craft, hobby, trade and business users. We could embroider for example your name and underneath it we could put perhaps either your Hobby or Profession, your Club name, your Trade, Company or Business name etc the choice is yours!   
Endless Green Group Ltd is an established family business, registered in England & Wales No 7836553. We offer a fast and friendly service, we sell a range of over 30,000 different products at competitive prices. Buy with confidence; check out our excellent customer feedback. All our products can be found listed in our Ebay shop. A VAT invoice is included with every sale. All the items shown are listed in our Ebay Shop |
Returns policy
Returns policy details |
You must contact us within 7 days of receipt of your goods if you wish to make any returns. All goods are returned at buyers expense and risk, and we recommend using Recorded Delivery. All postal charges are non refundable, including the original postage charge. Unwanted items must be in their original packaging, unused and suitable for re sale in order that a refund for the cost of the item is issued. Special and personalised orders, as well as items excluded for Health & Safety reasons, are non returnable. |
| Most Buy it now purchases are protected by the Distance Selling Regulations, which allow you to cancel the purchase within 7 working days from the day you receive the item. Find out more about your rights as a buyer - opens in a new window or tab and exceptions - opens in a new window or tab. |
Postage and packaging
Postage and packaging | Each additional item | To | Service | Estimated delivery* |
|---|---|---|---|---|
£3.00 | £2.50 | Ireland | Royal Mail Airmail (Small Packets) | Between 3 - 5 working days Seller posts within 2 days after receiving cleared payment - opens in a new window or tab. |
Domestic dispatch time |
|---|
Will usually dispatch within 2 working days of receiving cleared payment- opens in a new window or tab. |
Payment details
| Payment method | Preferred/Accepted | Buyer protection on eBay |
|---|---|---|
 | PayPal preferred | Pay with PayPal and you're fully protected. Learn more |