
S-Multi 51P - 3 in 1
Artikelnummer: 2016
| Article: T-51 | WIG |
MMA |
CUT |
| Article condition | New |
||
| AC frequency (Hz) | 50/60 |
||
| Ignition: | high frequency |
contact |
contact |
| Input corrent (A) | 23,5 |
28 |
29 |
Welding current |
10-180 |
10-165 |
10-50 |
Compressor Connection
(Bar) |
- |
- |
4,5 |
| Gas flow (L/min) | 2-5 |
- |
80-200 |
Electrode diameter
max. |
- |
4mm |
- |
Cutting performance
with max. 40A |
- |
- |
1-16mm |
Model input voltage |
230V, 1-phase |
||
Idling voltage
(V) |
40 |
||
| Power faktor (COSf) |
0.93 |
||
| Efficiency (%) | 85 |
||
| Weight(KG) | 15 |
||
| Overall dimension (mm) |
425×205×355 |
||
| Protection class | IP21 |
||
Our 3 in1 inverter welding apparatus combines the latest inverter technology in smallest space. Concerning the handling and equipment the robust and adequate all –in-one device leaves nothing to be desired. Through the low weight, the apparatus is very handy and everywhere applicable.
Further Information
WIG-Inverter: Through the latest inverter technology the on-time (ED) is 60 % at the maximum Ampere. This is achieved by very few apparatus. The welding current is adjustable by a turning knob and is also stepless adjustable.
MMA-Inverter: At the same time, the welding detector for the electro hand welding (MMA) with stick electrode is integrated in the apparatus. The welding current is stepless adjustable. The anti-stick function automatically deactivates the power and prevents the glow out of the electrode. At the start the hot-start function automatically augments the voltage, the result is, that also problematic electrodes fire.
Air plasma cutter: The integrated plasma cutter allows cross cuts from all conductive metals like standard steel, special steel, copper, brass, gray iron, aluminium, titan etc. Common air is used as cutting gas (a compressor is required), which is very cheap against gas. Due to the high temperatures during the plasma cutting, the apparatus guarantees little cutting seams, plane cut-out surfaces and no deformation of the work piece like e. g. at the autogenously flame cutting. The cutting current is stepless adjustable.
-
Accessories:
- Electrode
- Ceramic duct
- Ceramic ring
- Sheath duct
- WIG duct
- Port arch
- Clamp sleeve
- Ceramic
- We cooperate with GLS and a special shipping service for big goods

- Unfortunately, we can´t ship for free to the channel islands (Jersey, Guernsey, Alderney etc) ⇒ for more information please contact us
- We send out daily from Monday to Friday
- free delivery to UK.
- for more countries click here

- PayPal, Prepayment/bank transfer

- After receipt of payment you'll get a confirmation via Email and you can watch the details on your personal information page over Afterbuy.
- Please use your intended purpose at every bank transfer, you'll get it at the purchase completion.
- save purchase completion (SSL encryption) at Afterbuy
- You'll get informed via Email for every processing step
payment confirmation, shipping confirmation. - shipping tracking possible
- note: if you buy more items, please finish the purchase completion at the end.
In that case your order will send in one package.


