RELAY BOARD WITH 8 RELAYS WITH DIGITAL INPUTS,ANALOG INPUTS AND THERMOMETER DS1820 INPUT. YOU CAN BUILD AUTOMATIC , ROBOTIC PROJECTS. CARD HAS FT232RL(VIRTUAL COM). IT'S EASY TO CONTROL BY PC.
CARD WITH OPTOISOLATION(IT PROTECTS YOUR PC)
APLICATION WITH CONFIRMATION FUNCTION(WHICH RELAY IS ON/OFF)
SYSTEM FIND IT AS A NEW VIRTUAL COM PORT
POWERED FROM USB OR FROM EXTERNAL POWER SUPPLY(CHOOSE BY JUMPER)
APPLICATION WAS WRITTEN IN VB.NET EXPRESS EDITION 2008
FIRMWARE WAS WRITTEN IN BASCOM AVR
ALL SOURCES ARE PROVIDED
SYSTEM FIND CARD AS A NEW VIRTUAL COM PORT, AND ITS EASY TO CONTROL
APPLICATION CAN BE WRITTEN IN EVERY PROGRAMMING
ENVIRONMENT(C,C++,C#,PASCAL, DELPHI,JAVA,PHP) ETC. WHICHEVER WHERE IS
YOU CAN READ FROM 6 DIGITAL INPUTS, 3 ANALOG INPUTS AND 1 THERMOMETER INPUT. YOU WILL KNOW IF YOUR GATE, WINDOWS, DOORS ARE CLOSED OR NOT.YOU CAN MEASURE VOLTAGE(0-5V) AND IT SHOWS ON APPLICATION. YOU CAN ALSO PUT DIGITAL THERMOMETER DS1820 AND MEASURE TEMPERATURE.
CARD IS ALREADY PROGRAMMED AND READY TO USE
TAKE A CONTROL 8 DEVICES
CONTROL CARD VIA INTERNET
CHEAP, FAST DISPATCH!!!
WHERE YOU CAN USE IT
| - HOME AUTOMATION |
|
| - HOBBY USE |
| - USE IN INDUSTRIAL FIELD |
| - LAMP CONTROL |
| - GARDEN DEVICES CONTROL |
| - MANY OTHERS |
| RELAY CURRENT CONSUMPTION |
220V/10A |
| POWERED |
USB OR EXTERNAL 5V |
| SYSTEM |
WINDOWS, LINUX |
| DIMENSION |
10CM X 8CM |
| MICROPROCESSOR |
ATMEGA 8 |
HOW TO INSTALL
1) PLUG IN CARD TO PC
2) SYSTEM WILL FIND IT AS A NEW DEVICE, THEN INSTALL DRIVERS(FT232RL-DEVICES) PROVIDED WITH CARD
3) IN DEVICE MANAGER FIND NUMBER OF NEW VIRTUAL PORT, THEN WRITE THIS NUMBER TO PORT.TXT IN APPLICATION FOLDER
4) NOW CARD IS READY TO USE
SPECIFICATION
- FT232RL(VIRTUAL COM CHIP)
- COMMUNICATION:USB
- POWERED FROM USB OR EXTERNAL POWER SUPPLY 5V. IF YOU USE UBS SUPPLY THEN MAX 6 RELAYS CAN BE SWITCHED ON . IF YOU WANT USE ALL RELAYS THEN MUST BE EXTERNALL SUPPLY.
- APPLICATION IN ENGLISH VERSION
- DOCUMENTATION
- AVR CODE(BASCOM) AND APPLICATION IN VB.2008 INCLUDED
- 8 RELAYS, 10A EACH, 220V
- ISP PLUG:USE SIMPLE AVR PROGRAMMER TO REPROGRAM ATMEGA8
- WRITE YOUR OWN APPLICATION TO CONTROL RELAY CARD! IT'S VERY EASY, THERE IS SPECIFICATION HOW TO DO IT IN RAR FILE WHICH YOU CAN DOWNLOAD AFTER PURCHASE
- AFTER PURCHASE AND PAYPAL PAYMENT, I GIVE TO MY CUSTOMERS LINK TO DOCUMENTATION SOURCES ETC(ALL IN ONE FILE)
- THERE IS COUPLE VER. OF APPLICATION(BASIC AND ADVANCES WITH ADDITIONAL FUNCTIONS)
- DIGITAL INPUTS( X 6) -(PD2,PD3,PD4,PD5,PC5,PC4) JUST CONNECT PIN GND TO ONE OF PINS. APPLICATION WILL FIND THAT IT HAPPENED. FOR EXAMPLE DOOR WAS CLOSED.
- ANALOG INPUTS( X 3) -(PC0,PC1,PC2)) PUT BATTERY, OR SOME OTHER SOURCE OF VOLTAGE(0-5V) AND READ VOLTAGE VALUE
- THERMOMETER INPUT( X 1) -(PC3)) CONNECT DIGITAL THERMOMETER DS1820 LIKE ON THE PICTURE BELOW AND READ TEMPERATURE
ASCII CONTROL CODE
| CHAR |
TASK |
"g" |
Switch on relay no 1 |
"d" |
Switch on relay no 2 |
"f" |
Switch on relay no 3 |
"e" |
Switch on relay no 4 |
"b" |
Switch on relay no 5 |
"a" |
Switch on relay no 6 |
"h" |
Switch on relay no 7 |
"c" |
Switch on relay no 8 |
"o" |
Switch off relay no 1 |
"k" |
Switch off relay no 2 |
"n" |
Switch off relay no 3 |
"m" |
Switch off relay no 4 |
"j" |
Switch off relay no 5 |
"i" |
Switch off relay no 6 |
"p" |
Switch off relay no 7 |
"k" |
Switch off relay no 8 |
IN VB.NET ENVIRONMENT THERE IS COMPONENT SERIALPORT WHICH IS MAIN MODULE IN APPLICATION. THIS COMPONENT TRANSMITE AND RECEIVE CHARS. SERIALPORT.WRITE("g") - THIS COMMAND WILL SWITCH ON RELAY NO 1. SPEED OF TRANSMISSION IS 1200 b/s
CONFIRMATION CODE
EXAMPLE HOW TO CONNECT
APPLICATION
APPLICATION HAS TIME FUNCTION AND YOU CAN SET WHEN YOU WANT TO ON AND OFF RELAY. APPLICATION HAS ALSO SAVE AND LOAD TIME SETTINGS WHICH YOU HAVE SET. YOU CAN MINIMALIZE APPLICATION TO THE TRAY SYSTEM.IN THE SAME TIME YOU CAN USE DIGITAL INPUTS AND THERMOMETER OR ANALOG INPUTS AND THERMOMETER. YOU CANT USE DIGITAL INPUTS AND ANALOG INPUTS IN THE SAME TIME
Back to homepage
) 
