• Creality Ender 3 / CR-10 Pin 27 Breakout Board for BL Touch and other sensors

    This PCB provides a simple, and clean way to add a BL Touch (or a clone) levelling sensor to easily be added to a Creality 3D (Ender 2/3, CR-10, CR-10s, etc) printer without the need of cutting and soldering any cables.
    EUR 6.24
    From United Kingdom
    EUR 4.37 postage
    or Best Offer
  • Ender 3 Pin 27 Board for BL Touch Autobed Levelling or filament sensor

    (You must have a Bootloader flashed to your Ender 3 Board in order to use this. Support for that is not provided. Pinout from top to bottom: 5v, GND, Signal, the Board also has the labels next to the JST XH connector) Be careful here as if you use a straight through connector it swapped the connections so i had to swap 5v and ground as shown in one of the images.
    EUR 7.94
    From United Kingdom
    EUR 4.54 postage
    or Best Offer
  • 3D Printer hotbed MOSFET expansion module inc 2pin lead Anet A8 A6 A2 Compa Q3D7

    It very often that after purchasing 3D printer (especially in Anet A8, A6, A2) motherboard is getting all load to heat up Printing Hotbed. That creates fire hazard problems as connectors are not suitable for that high loads.
    EUR 2.36
    From Hong Kong
    Free postage
    Brand: Unbranded
    109 sold
  • New listingDreamMaker OverLord Pro - A Desktop FDM Delta 3D Printer - Classic Blue

    Overlord 3D Printer is a new version of delta 3d Printer. It is based on FDM 3d printing technology which is low cost and eco friendly. All firmware is open-sourced. We created OverLord to be unique.
    EUR 566.19
    0 bids
    EUR 113.47 postage
    Ending Today at 12:20PM BST1m 58sFrom United Kingdom
  • 1.75mm to 0.4mm MK8 Nozzle Print Head Hot End Assembled for Extruder 3D Printer

    This set includes a 30mm long. tube, aluminum heating block and thermistor of good quality. There are also heating. Stainless steel updated throat tube for trouble free, low friction print, much solid quality.
    EUR 2.79
    From Hong Kong
    Was: Previous priceEUR 2.94
    Brand: Unbranded
    Free postage
    or Best Offer
    268 sold
  • US Stock Cetus3D MK2 Standard 3D Printer High Precision Linear Rails Tieritime

    Quality Linear Rails. 3D printers tend to be ever more complicated, bulky and confusing. The build plate is a 3mm aluminum plate, which ensures a perfectly flat build surface. It is fixed onto the linear guide directly, and there are no moving parts between the slider and the build plate.
    EUR 311.31
    From United States
    Was: Previous priceEUR 338.38
    Free postage
    or Best Offer
    30 watching
  • Silicone boot/sock for 3D printer (Wanhao Duplicator 6, Monoprice Maker, MK11)

    Silicone boot for Wanhao Duplicator 6 and Monoprice Maker. The boot is made using 3D printed mould, so there are visible lines on the surface. To install the boot, disassembly of the heat block is required.
    EUR 7.83
    From Greece
    EUR 3.29 postage
    Brand: Unbranded
    72 sold
  • 3D Printer makerbot MK8 Extruder Aluminum Block Kit Reprap Right Hand UK

    3D Printer MK8 Extruder Aluminum Block DIY Kit. Type: Left hand/ Right hand/ Normal Optional. Material: Aluminum Alloy. 3 Types Optional: Normal, Right hand, Left hand. Note: Due to light and screen difference, the item's color may be slightly different from the pictures.
    EUR 3.17
    From China
    EUR 1.12 postage
    Brand: Unbranded
    or Best Offer
    17 sold
  • Creality Pin 27 Board for BL Touch Autobed Levelling or Filament Sensor

    (Although for the Ender-3, it will also work with many of the other Creality printers. Pinout from top to bottom: 5v, GND, Signal, the Board also has the labels next to the JST XH connector) Be careful here as if you use a straight through connector it swapped the connections so i had to swap 5v and ground as shown in one of the images.
    EUR 15.51
    From Australia
    EUR 10.55 postage
    or Best Offer
    129 sold
  • Trianglelab NEW 3D Printer 3D TOUCH Free Shipping Auto BED Leveling Sensor Auto

    Do not remove or deform elastic material attached on the push-pin. 3D Printer Auto Leveling Sensor Auto Leveling test 1. By using progressively designed solenoid and hall sensor,It can integrate high precision in such a simple structure.To make it more user-friendly and to bring you more enjoyable printing experience we add many smart functions such as self-test,false alarm,alarm release and test mode for M119.
    EUR 15.87
    From China
    Free postage
  • 4pcs filter TL-Smoother new kit addon module for 3D pinter motor drivers us H2G1

    The TL-Smoother is an addon module for 3D printer stepper motor drivers. 4 X filter. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.
    EUR 6.85
    From Hong Kong
    Free postage
    Brand: Unbranded
    54 sold
  • Xyz da vinci Pro nozzel

    Have taken this off a xyz pro, working fine till board died, but sold as seen and is not new, has been used a fair bit so if you want new don't bid, last ran on petg. So worked ok last time it was used, no stepper motor as part of the sale, no returns or moans if it don't print perfect for the next 100 years,
    EUR 9.08
    0 bids
    EUR 21.96 postage
    Ending Oct 25 at 8:33PM BST4d 8h
    or Best Offer
    From United KingdomCustoms services and international tracking provided
  • For Reprap 3D Printer Diamond Hotend 3 Colour Hot End 3 IN 1 OUT Extruder Kit

    1 3in 1out multi extruder nozzle. Color: Silver(as pictures show). Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    EUR 12.20
    From China
    Free postage
    Brand: Unbranded
    17 watching
  • 10pcs/Set Cutting Pliers Tweezers 3D Printer Tool Kits Accessories For Repairing

    Long lasting hardened steel cutter. 1 Set x 3D Printer Tool Kits. Works with all 3D printer ABS and PLA plastic models. Comfortable grip handles. Working on a variety of corners and curves. Our goal is.
    EUR 10.51
    From China
    Was: Previous priceEUR 11.06
    Brand: Unbranded
    EUR 0.33 postage
  • E3D V6 Hot End Full Kit 3D Printer Extruder Part 1.75 Bowden 0.4mm Nozzle J-Head

    EUR 10.72
    From United Kingdom
    EUR 2.27 postage
    Brand: Unbranded
  • Creality 3D-Printer Ender-3 235X235mm Borosilicate Glass Heat Bed Plate Platform

    Specially designed for Creality 3D printer Ender 3. Acid and alkali resistant. This heat bed is designed as an important accessory of 3D printer. A good solution to the problem of platform unevenness.
    EUR 21.05
    From China
    Free postage
    Brand: Unbranded
    23 sold
  • CREALITY CR-10s /MINI/S4/S5. ABL AUTO BED LEVELLING KIT (ATMEGA 2560 board) SALE

    This version is different to my usual Cr10 kit in that it does not contain the bootloader flashing tool or the sensor mount. 1x level shift chip by XYGAX- Pre-Soldered making this sensor fully PLUG AND PLAY.
    EUR 24.95
    From United Kingdom
    EUR 9.07 postage
    Brand: Unbranded
    6 watching
  • For E3D V6 Nozzle 0.4mm ,For Carbon Printing + Exotics , 3D Part 2pcs O4R8

    E3D V6 Stainless Steel 3D Printer Nozzles M6 Thread 0.4mm 1.75mm Filament For Carbon India Exotics, 3D Part Colour:silver Material:stainless steel Package Contents: 2 x Nozzle Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
    EUR 1.12
    From Hong Kong
    Free postage
    Brand: Unbranded
  • 1kg/2.2lb 1.75mm PLA Filament Consumables For 3D Printer Printing Transparent uk

    Material: PLA. Each One Weight 1Kg. Material : PLA. Compatible with most 3D printers currently out on the market. To Fit : 3D Printer. Colour : Transparent. Feature : suit for the 3D printers. •Bottom Plate temperature: 60-80℃.
    EUR 10.21
    11 bids
    Free postage
    Ending Oct 27 at 4:18AM BST5d 15hFrom ChinaBrand: Unbranded
  • 5Pcs 5mm Bore Eccentric Spacer V Wheel For Aluminum extrusion 3D printer Reprap

    To Fit: for 3D printer Reprap. For V wheel aluminium extrusion 3D printer Reprap. Type: Eccentric Spacer V Wheel eccentric column. For 3D printer parts Open builds eccentric column / isolation column hexagonal bore 5mm 6.35mm V groove stainless steel.
    EUR 2.25
    From China
    Free postage
    Brand: Unbranded
  • 220mm Magnetic Print Bed Sticker Flex Build Plate Surface Tape For 3D Printer

    The print does not distort the edges of the model. Part A is flexible and magnetic, easy to move away from the build platform and easy for your to take away the print model. If the surface is not sticky, don't worry, rotate the magnetic A side by 90° to match the other.
    EUR 11.51
    From Hong Kong
    Was: Previous priceEUR 12.24
    Brand: Unbranded
    EUR 1.12 postage
    8 watching
  • Auto Level Inductive Sensor LJ18A3-8-Z/BX Soldered For Anet A8 A2 A6 3D Printer

    Suitable for 3D printer with Anet mainboard. Sensor type: Inductive. 1 x Inductive Sensor. Model: LJ18A3-8-Z/BX. Detail Image.
    EUR 8.57
    From Hong Kong
    EUR 1.69 postage
    Brand: Unbranded
    73 sold
  • DC 24V 4010 40mm Brushless Cooling Fan Cooler For CPU GPU 3D Printer Ender-3

    Creality 3D 4010 24V 0.1A 40mm Extruder Cooling Fan Blow For Ender-3 3D Printer. Z-axis Stainless Steel Lead Screw Rod w/ T8 Brass Nut For Ender-3 3D Printer. 235 235mm Magnetic Platform Hot Bed Sticker Durable For 3D Printer 120℃-150℃.
    EUR 2.34
    From Hong Kong
    EUR 1.12 postage
    Brand: Unbranded
    or Best Offer
  • KINECT V2 + ADAPTER FOR WINDOWS PC DEVELOPMENT - PARANORMAL - INCLUDES CAMERA !

    The kinect V2 is already USB3.0 and does not need the MS adapter. Kinect adapter modification Xbox One S X PC - Professional FAST Quality Service (#202233731066) £26.00 View Item. It does what is said.
    EUR 53.32
    From United Kingdom
    EUR 21.56 postage
  • 4PCS TL-Smoother V1.0 Addon Module for 3D Printer Stepper Motor Drivers AccessM4

    4xTL-Smoother V1.0 Addon Module(with 4pcs line). Lower vbration lower noise smoother result!
    EUR 8.37
    From Hong Kong
    Free postage
    Brand: Unbranded
  • Geeetech MK8 extruder Updated Print Heat Nema17 for Reprap Prusa I3 3D printer

    Support ABS/ PLA/Flexible PLA/Wood/Nylon
    EUR 26.10
    From China
    Free postage
    or Best Offer
    106 sold
  • All Metal and 300°C Flexible Friendly Hotend Kits for CR-10 Printers

    EUR 14.57
    From China
    Was: Previous priceEUR 15.50
    Free postage
    2 watching
  • Creality 3D 4010 24V 0.1A 40mm Extruder Cooling Fan Blow For Ender-3 3D Printer

    1x Creality 3D® cooling fan. DC 24V 4010 40mm Brushless Cooling Fan Cooler For CPU GPU 3D Printer Ender-3. Type: 4010. Z-axis Stainless Steel Lead Screw Rod w/ T8 Brass Nut For Ender-3 3D Printer. 235 235mm Magnetic Platform Hot Bed Sticker Durable For 3D Printer 120℃-150℃.
    EUR 2.78
    From Hong Kong
    EUR 1.12 postage
    Brand: Unbranded
    or Best Offer
  • Hot 31mm 5015 24V Small Ultra-Quiet 25dB Turbo Blower Cooling Fan for 3D Printer

    Noise: 25dB. Inlet size: 31mm(Approx.). 1 Turbo Small Fan. Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    EUR 1.28
    From China
    Free postage
    Brand: Unbranded
    18 sold
  • Creality Ender 3, 2, 4 All Metal Hotend/Titanium Thermal Heat Break Basic Kit

    Will also fit the Following Creality 3D Printers - CR-10 / CR-10S / CR-10 S4 / CR-10 S5 Printers Plus other Creality Printers Like The Ender 2, Ender 3, Ender 4, CR-10 Mini, CR-8, CR-7 Will Also Fit Any Other MK8 Type 3D Printers Also.
    EUR 11.34
    From United Kingdom
    EUR 10.09 postage
    Brand: Unbranded
    4 watching
  • A8 3D Printer Mainboard For Anet V1.0 Reprap Mendel Prusa Control Motherboa I3V8

    3D Printer Control Motherboard for Anet V1.0 Printer Control Reprap Mendel Prusa for Anet A8Highly integrated one board, to solve the Ramps1.4 combination interfacecumbersome problem.Optimized layout routing and thermal design, the whole board performance ismore stable.Large USB, more stable connection, more concise interface, wiring moreconvenient, more stable, longer life.On-board 4-channel A4988 16-step stepping motor driver ( Z-Axis motorinterface ).PWM DC 3 outputs ( 1 channel high current, 3 channel medium current, 2channel small current ).Mos tube with high performance and low on-resistance is used for driving, andthe heat dissipation is better.ST original power supply chip, support 12V - 24V power input to solve theRamps voltage conversion chip fever.
    EUR 22.09
    From Hong Kong
    EUR 1.12 postage
    Brand: Unbranded
    31 watching
  • 3D Printer Heated Bed Thermal Insulator Cotton Sheet Heat Insulation 300x300mm

    Can be used for aluminum substrate, PCB hot bed, silicone hot bed bottom. This product is a closed-cell elastic material, which has excellent properties such as softness, resistance to bending, cold resistance, heat resistance, water resistance, low thermal conductivity, shock absorption and sound absorption.
    EUR 3.62
    From Hong Kong
    Free postage
    Brand: Unbranded
    3 watching
  • AM8 3D Printer Extrusion Metal Frame - Full Kit for Anet A8 upgrade (Natural)

    2 x V-SLOT 2040 Aluminium Extrusion - Natural Anodized 340mm. 3 x V-SLOT 2040 Aluminium Extrusion - Natural Anodized 313mm. 2 x V-SLOT 2040 Aluminium Extrusion - Natural Anodized 440mm (PRE-TAPPED). - V-Slot is just like a generic 2020 rail and 100% compatible with standard 2020 Extrusion hardware and accessories.
    EUR 68.07
    From Portugal
    EUR 34.04 postage
    75 sold
  • Titan Extruder+Stepper motor+Volcano Bowden Hotend for 1.75mm 3D Printer Durable

    1 Extruder Stepper motor Volcano Hotend Set. You need stepper motor with D shaft to use with this Extruder. Scope: 3D Printer.
    EUR 21.49
    From China
    Free postage
    Brand: Unbranded
  • 3D Printer Parts Heating Controller MKS MOSFET module for Heat Bed/Extruder O CQ

    Each one will be done functional test .Superior performance of MOSFET (Max 280A).Extra large heat sink , the maximum current can be up to 30A or more.Can use hot bed output signal of Ramp1.4 and MKS series to control.Can use digital signal of 5-24v to control .Color: Black redMaterial: plastic, metalPower Supply: 12V-24VFunction and Use: control hot bed, print head heating.Usage:1. Connect Power to power source, please note the anode and cathode.2. Connect Hotbed to heated wire , please note the anode and cathode.3. Connect digital control signal to Gnd,D8.4. Connect the control signal of Ramps1.4 or MKS MOSFET to -Bed 5. Choose one signal group to connect.Package included:1 x MKS MOSFET moduleNote: Light shooting and different displays may cause the color o.
    EUR 7.08
    From Hong Kong
    EUR 1.12 postage
    Brand: Unbranded
  • 3D Printer Accessories 6x 0.4mm Nozzle 6x 1.75mm Filament Hotend Nozzle Cle A7P7

    6 0.4mm Extruder Brass Nozzle Print Head for 3D Printer. size: Brass nozzle size: 0.4mm. 6 Extruder 1.75mm stainless steel nozzle throat for 3D printers. The Nozzle cleaner's color is random, cannot be selected.
    EUR 5.09
    From Hong Kong
    Free postage
    Brand: Unbranded
  • 3MM MK3 Aluminum Heated Bed Bed PCB Heatbed Platform for Reap 3D inter Gift

    1X Black Aluminum MK3 heatbed. 3, heating table and aluminum substrate into one, better temperature stability. Size: 220mm 220mm 3mm hole spacing 214mm. thickness: 3mm. 1, the whole board full gold process, the cost is much higher than the spray tin plate!
    EUR 10.80
    From China
    Free postage
    Brand: Unbranded
    or Best Offer
  • 3d printer spray adhesive glue for glass build plates. Easily remove the prints

    Improve your 3D printing experience with the best first layer adhesion solution with Glass Build Plate Wizard. Prints bond to the printing platform perfectly! You will rarely need to use rafts or brims to hold the print down, see our videos to see how simple it is to remove the finished print without losing the adhesive qualities this 3d printing glue.
    EUR 14.74
    From Slovakia
    EUR 5.45 postage
    or Best Offer
  • 220mm x 220mm x 3mm 3D PRINTER GLASS for print bed Anet A8 Tronxy Reprap Prusa

    Printers supported: Anet A8, Tronxy, Reprap, Prusa i3 and others. These can be used to secure the glass to 3D Printer Hot Bed.
    EUR 9.08
    From United Kingdom
    EUR 17.47 postage
    Customs services and international tracking provided
    110 sold
  • Auto Leveling Position Sensor Bed Level for 3D Printer Anet A8 i3 RepRap NPN Top

    1 Auto Leveling Position Sensor. Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    EUR 2.51
    From China
    Free postage
    Brand: Unbranded
    75 sold
  • FEP Film/Sheet 3d Printer SLA DLP Teflon Film 0.1mm thickness cut to size.

    This is for FEP film cut to size with a maximum width of 400mm (40CM). Note: The photo shows a different size sheet.
    EUR 1.13
    From United Kingdom
    EUR 2.84 postage
  • 10x Brass 0.4mm Extruder Nozzle Head for MK8 Makerbot Prusa i3 3D Printer FG

    This Extruder nozzle is a perfect match to the current one on the MakerBot Replicator 2 3D printer as well the RepRapGuru Prusa i3 3D Printer and many others. 10 Pcs Extruder Nozzle Print Head. Nozzle: 0.4mm.
    EUR 2.69
    From China
    Free postage
    Brand: Unbranded
    or Best Offer
    22 sold
  • Creality "Ultimate" Full Titanium All Metal Hot End Ender 3, 2, 4, Upgrade Kit

    Will also fit t he Following Creality 3D Printers - CR-10 / CR-10S / CR-10 S4 / CR-10 S5 Printers Plus other Creality Printers Like The Ender 2, Ender 3, Ender 4, CR-10 Mini, CR-8, CR-7 Will Also Fit Any Other MK8 Type 3D Printers Also.
    EUR 22.67
    From United Kingdom
    EUR 10.19 postage
    Brand: Unbranded
    16 watching
  • 3D Printer Reprap Prusa i3 Parts X Metal Exturder Carriage X Axis Printing Head

    The axis distance is 18mmThis is a neatly designed mounting base block for extruder on X-axis of a Prusa I3 printer. This carriage can be used with direct extruder and bowden extruder. Bearing holes distance:18 mm (and can slightly adjusted to adapt with printed plastic parts).
    EUR 18.34
    From Hong Kong
    EUR 0.40 postage
    Brand: Unbranded
    34 sold
  • Aluminum Heater Heating Block For 3D Printer Accessory Hotend MK10 Extruder GB

    1 MK10 Extruder Hotend Heater Block. Specification :MK10 heating block. This accessory fits for 3D printer with its excellent performance. Not only easy to install, but also high heat conduction and fast heat dissipation.
    EUR 1.84
    From Hong Kong
    Was: Previous priceEUR 1.95
    Brand: Unbranded
    Free postage
  • Mega Creality Universal Full Titanium Alloy All Metal Hot End 3D Printer

    Will also fit the Following Creality 3D Printers - CR-10 / CR-10S / CR-10 S4 / CR-10 S5 Printers Plus other Creality Printers Like The Ender 2, Ender 3, Ender 4, CR-10 Mini, CR-8, CR-7 Will Also Fit Any Other MK8 Type 3D Printers Also.
    EUR 17.00
    From United Kingdom
    EUR 10.09 postage
    Brand: Unbranded
  • 40cm 1.75mm PTFE Teflon Nozzle Feed Tube For Ender-3 3D Printer -190℃ to 280℃

    1x Creality 3D® 3D Printer Teflon Tube. Can resistance to high and low temperature, from -190℃ to 280℃. Application: Ender-3 3D Printer. Temperature: -190℃ to 280℃. We will try our best to reduce the risk of the custom duties.
    EUR 1.69
    From Hong Kong
    EUR 1.12 postage
    Brand: Unbranded
    or Best Offer
  • 2x MK7/8 Extruder Nozzle 0.4mm CTC Nozzle PTFE In the Nozzle For DIY 3D printer

    2 Extruder Nozzles. Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Quantity: 2pcs.
    EUR 1.27
    From China
    Was: Previous priceEUR 1.34
    Brand: Unbranded
    Free postage