Craft Woodworking Supplies

5 off - Slimline Pen Kits Mixed. Mixed Finishes . High Quality slim line kits. 1 off Gold. 1 off Copper.

Perfect for DIY, Craft, Model Making, Projects, Woodwork, Art making, etc. Heavy duty springs with swivelling jaw ends for a secure even grip. Size: 2" (5cm) - Jaws open 32mm max. Food Storage. Plumbing Tools.

(Degree of Protection: IP55. 1) Rated at 16amp, it will be suitable for induction motors up to 1.5hp or brush motors up to 2hp. 3) It is a no volt release type of switch, providing safety in the event of an interruption of power.

Material: Ebony Lumber. 1 Ebony Lumber. Ebony is a quality and deluxe wood material for many wood product, which is, colorfast, bug-repellent and anti-aging. Fine open grain with dark color, stylish and perfect for many uses like handle, paperweight.

Note: Each blank is dry FOR YEARS & inspected for color, grain, and to be free of defects and cracks you will be getting the best pen blanks you can imagine. All our blanks are square cut on the ends.

Walnut Hollow-Basswood Whittler's Kit. The ideal set of wood for your carving projects! Smooth, even grain, no resin or pitch, light in color and great for woodcarving. This package contains two blocks measuring 2x1x3/4 inches, two blocks measuring 4x1x3/4 inches, three blocks measuring 2x1-1/2x3/4 inches, and three block measuring 4x1-1/2x3/4 inches. Made in USA.

10x Wood board. Color: Wood color. Material: Wood. Lightweight materials, easy to carry.

Bol pol™ FFFF Grade Pumice – 1kg. The super fine and ultra-fine FFF or FFFF is widely used by Cabinetmakers and French Polishers to smooth high spots in shellac or varnish type finishes, also used as a hardwood pore/grain filler.

Carnauba wax is obtained from the outer waxy coating of palm fronds from the Copernicia Cerifera (the Brazilian Carnauba Palm). A maximum of twenty leaves can be collected during each of the two yearly cutting seasons.

Solid Wenge wood. pair of 2 scales for knifemaking. DEPTH: 38-40mm (1,6" ).

(1) Wood turning chisel/ gouge sharpening jig. 1st tool: Gouge Chisel sharpening jig. You will be pleasantly surprised at how razor sharp your tools will be using this jig. When sharpening free-hand a lot of turners including experienced turners, find it difficult to get a single facet bevel and sharp grind on their chisels, giving you a poorer finish on your work piece and consequently more effort with sandpaper.

Iron-On Wood Veneer - American White Oak  Thickness 0.6mm This is pre-glued real wood veneer. Simply Iron on with a domestic iron set at 'Cotton' or 'Hot'. Absolutely ideal for doors, table-tops, speakers and general DIY projects. To apply, cut to the appropriate size, leaving a slight overhang on each of the four edges. This is necessary as the veneer will tend to shrink across the width due to the removal of moisture during the ironing on process.

Solid Wenge wood. Wood block for knifemaking. HIGHT: 28-30 mm (1,1" ).

Pair of 2 scales for knifemaking. DEPTH: 60-65mm (2,4" ).

Material:Ebony. 1 Black Ebony Wood. Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

WOODEN SHAPES. Once your order has been dispatched I will mark it. SMOOTH FINISHED LASER CUT 3mm PLY shapes.

MORAKNIV craft knives are well known and greatly appreciated for their sharpness and precision. WOODCARVING 120. 100% Original MORA of Sweden Product. Slöjdkniv 120 has a narrow and pointed knife blade made of laminated steel, which gives it superior toughness and edge resiliency.

1 X Woodcutter. Material: Beech High Carbon Steel. Scope of application wood carving, stone carving, fruit carving. Lovely Banana Type Handle. They are made from high quality carbon steel, and wood handle is comfortable to use.

Perfect choice for knife handles and other crafts and i t will take a very good polish. Sufficient for one handle, sold in a pair for easier, more convenient cutting of handle shapes. Color: Green.

4 x 450mm x 100mm x 2.1mm. 6 x 450mm x 75mm x 2.1mm. 3 x 450mm x 75mm x 3.2mm. 3 x 450mm x 75mm x 4.5mm. 3 x 450mm x 75 x 5.5mm. 3 x 450mm x 75mm x 6.7mm. 12 x 450mm x 12.7mm x 12.7mm. 2K - GIANT BALSA WOOD BUNDLE - ASSORTED SIZES, thicknesses & widths.

African Ebony turning Squares.

These tools are perfect for wood carvers. The handles are made with quality polished wood for comfortable grip and the chisels are made with razor sharp harden steel. One 1/2 " wood chisel. One 1/4 " "U" gouge.

These are an assortment of small natural rustic wooden discs surrounded with bark antastic for table numbers, wedding decorative ideas and general crafting. Size: pls see the referred picture. Contents of pack 25 pieces Quantity 25 Brand Unbranded MPN Does not apply UPC Does not apply EAN Does Not Apply.

Use for gouges and vee tools both inside and outside. Timber moulding with areas of leather. Mirror finish can be achieved quickly.

Quantity: 50 Pcs(Mixed). We will reply you ASAP. Due to the light and screen difference, the item's color may be slightly different from the pictures. Your kind understanding and patience will be highly appreciated.