Pro Audio Cases, Racks & Bags

Black Hex/Aluminium flight case designed specifically to transport 1 x Martin Atomic 3000 Strobe for total protection. 1x Dish handle with backing plate fitted to the top. 2x Lid-stay hinges hold the lid just passed 90 degrees.

Also fit for Sony ECMXYST1M Stereo Microphone.

This has been gathering dust for a while but is in full working order.

4u 19in rack sleeve, heavy duty all-steel construction. Rack strip front and rear, sprung handle on each side.

Type:Microphone Protective Case. Function:Protect your Microphone. 1 x Microphone Protector. Also fit for Sony ECMXYST1M Stereo Microphone. Due to the different monitor and light effect,the actual color maybe a slight different from the picture color.

3u Steel Rackstrip. I also carry a large range of Flightcase fittings and 19” rack panels as well. Our knowledge of Flightcase construction is extensive as we used to manufacture them for 16yrs and we have also been hiring out large sound systems for the past 30yrs so I think we have gained a good bit of knowledge about what works in a sound system as well as what does`nt.

20u Steel Rackstrip. I also carry a large range of Flightcase fittings and 19” rack panels as well. Our knowledge of Flightcase construction is extensive as we used to manufacture them for 16yrs and we have also been hiring out large sound systems for the past 30yrs so I think we have gained a good bit of knowledge about what works in a sound system as well as what does`nt.

These cost effective racks are made from sustainably grown FSC certified pine. Multiple orders will take longer of course. I can also varnish or stain the rack for you. Solid wood, no MDF, chipboard or plywood.

Plastic case bag for wireless microphone PGX4/PGX24 SHURE or similar size microphone. Microphone not included. us, we are always there for your service.

The Fredenstein Bento 10 is a 10-channel 500-series enclosure with advanced audio routing capabilities. Fredenstein Bento 10 Overview Further product information provided below.

Black Hex/Aluminium flightcase built for a Pioneer XDJ-RX2. 1x Techno handle fitted on the front lid of the case. 4x small rubber feet bolted to the base of the case. 4x Large rubber feet bolted to base.

Ex Demo Pioneer DJM2000 Flight Case. RRP: £120 so grab a bargain! Drill hole on one section of the case as per the image shows. - Egg Foam in Lid.

2u rack drawer in good condition a little rack rash here and there but in perfect working order. See photos Item will be packed to a high standard and shipped tracked and insured

Used 6u rack flight case. Lightweight but strong aluminium finished plywood construction. Removable front and back with great quality sprung catches. Has been used on the road but in good condition. The top has been adapted to allow access to the item in the upper position in the box - I used a small mixer but would also work with a I pad for example.

1x Blcak Rubber Strap. - Size: 16cm x 2cm.

Black Hex/Aluminium flight case designed to fit a Line 6 Helix guitar effects pedal board. The unit can be operated whilst in the base of the case. 4x Large rubber feet bolted to the base.

Internal Size 983mm(L) x 383mm(W) x 90mm(H). Black Hex/Aluminium flight case designed to hold your guitar effects pedals. 6x Large rubber feet bolted to the base. 2x Strong butterfly catches on the ends of the case hold the lid in place.

This was used for a TFT computer screen and the foam is cut to shape. This can be removed quite easily. 8.9kg self weight.

Cases are in good condition but have been used.

FREESTANDING DESKTOP 4U STUDIO RACK. MADE FROM HDF AND FINISHED IN 'TUF CAB' AN ACRYLIC THIXOTROPIC VISCOUS COATING, COMMONLY USED ON PROFESSIONAL SPEAKER CABINETS. 10 DEGREE SLOPING DESIGN WITH A FLAT TOP FOR MONITORS ETC.

PAIR OF 6U ALUMINIUM RACKSTRIP. ALUMINIUM RACKSTRIP PUNCHED AT THE INTERNATIONAL STANDARD DISTANCE. FOR 9.5MM BOARD OR A TONGUE & GROOVE OF 13.5MM THICK AND M4 X 12MM RIVETS. FOR 6.5MM BOARD OR A TONGUE & GROOVE OF 9.5MM THICK AN M4 X 8MM RIVETS.

It has been designed so that the unit stays in the base during use with plenty of room for connections. Internal 424mm (L) x 352mm (D) x 110mm (H) including 80mm at the rear for connections. Fully foam lined.

FREESTANDING DESKTOP 2X3U 2U BRIDGED STUDIO RACKS. MADE FROM MDF AND FINISHED WITH TUF CAB TEXTURED FINISH. 10 DEGREE SLOPING DESIGN WITH A FLAT TOP FOR MONITORS ETC. GREAT FOR CONVERTING A NORMAL DESK TO A MUSIC WORKSTATION.

Brand new and unused. Suits X Air XR18 / XR16 / XR12.

19” 16A Connector Rack Panel. Type 16A Connector Panel. Cut Out Size 16A Connector 58mm. This Rack Panel has been manufactured to exacting standards from 1.2mm mild steel which is then folded for a more rigid panel.