RC Model Vehicle Parts & Accessories

Excellent sealant - perfect for patching small holes. Shoe Goo is the #1 shoe repair adhesive! The unique formula is designed for strong abrasion resistance and better adhesion to flexible materials.

SET OF TWO (2) DUALLY ADAPTORS MADE TO FIT 1/10, AND ANY AXLE THAT USES A 4MM THREAD AND 1.9 Tire. (12mm hex). RIMS, TIRES, CHASSIS AND CAR IN THE PICTURES ARE NOT INCLUDED. ONE SET OF TWO (2).

I set about making variations of new arms to replace the standard ones and found due to the limited throw of the servo actuators it was a compromise between curl and outward extension, so settled for losing a bit of extension for more curl.

Start your nitro R/C engine effortlessly using this new Roto Start with powerful 550 motor. Insert the 6mm shaft with hexball tip into the new Torque-Slip design backplate receptacle to start your engine.

5 Minute Z-POXY is a premium two part epoxy adhesive that dries clear. Vibration resistant and fuel proof, this epoxy is perfect for all types of hobbies and crafts. Excellent for furniture. Durable and sand-able.

Made from 4 x AA 2500mAh Nimh. Fitting : Futaba. Best Uses for new type Batteries are. ready to play, where as the old Ni-MH type would be very low on capacity.

New reproduction bodyshell undertray gear cover and wing the optima Mid swb. Undertray done from scratch, and trim lines are around the difficult bits. Made from high quality heat treated lexan with overspray protective covering.

Tamiya Sand Scorcher (2010) Body Parts Set, Part No's. 51406 (SP-1406). 58016: Sand Scorcher. 84164: RTR Sand Scorcher 2010. Tony's Tamiya Spares. Any currently available 5, 7 or 8 digit part can be specially ordered, subject to 25% deposit.

Tamiya Black B Parts (Front & Rear Damper Stay & Servo Parts), Part No's. 58106: Stadium Blitzer. 58122: Blitzer Beetle. 58482: Stadium Blitzer 2010. 58502: Blitzer Beetle 2011. Tony's Tamiya Spares.

Tamiya Axle Spring (2 Pcs.)., Part No's. Tony's Tamiya Spares. 57741: RTR Hornet. 58045: Hornet. 58124: Super Hornet. 58336: The Hornet (Re-Release).

Made from 8 x AA 2500mAhNimh. ready to play, where as the old Ni-MH type would be very low on capacity. they slowly drain down without being in any apliance. Weight : 230g. Best Uses for new type Batteries are.

A good choice for RC fans. Suitable for 1/10 RC Car. Model Number: R type latch. Fixed car shell to protect the parts of the car. 50 1/10R buckle latches. High quality with Stainless Steel, lightweight and portable.

1pc x Storage Case. Anyway we will try our best to avoid this kind of thing. The inner bag is designed with breathable endoplasmic reticulum.

C908178 500908178. Tamiya X-Large Carry Holdall. Tamiya RC Cars. TOP categories. Sylvanian Familes. Sylvanian Families. Plastic Model Kits.

The stickers are pre-cut, waterproof and protected with a glossy film. Over 100 sets sold!

Alarm set value range:OFF~2.7~3.8V. Pacakeg Include.

DT03, DT03T, etc. Tamiya DT-03 Carbon Damper Stay (Rear), Part No's. 54563 (OP-1563). Tony's Tamiya Spares. Made from lightweight and rigid carbon fiber material, this stay will enhance damper performance.

Each part has a separate interior space, and a EVA that protects MJX Bug B5W from scratches. If you encounter heavy rain in the wild, you needn't worry about the drone get wet. Two Ways.Adjustable padded shoulder strap design can relieve pressure on your shoulders.

FTX OUTBACK PAINTED TREKA </br> BODYSHELL - RED

CARISMA 15903 SCA-1E COYOTE CLEAR BODY SET Carisma sca-1e coyote clear body set. PICK UP OPTION. © SMD Direct. Buy now and save! Price:£2.00. You might also like.

SW0327CX-MT-A : Motors A (2) - Propel Starwars X-Wing/Tie Fighter. This is a pair of A Motors for either the X-Wing or the Tie Fighter. These have a Red/Blue cable. Midland Helicopters are one of the longest established model helicopters specialists in the world.

Manufacturer's IDs: 45057. This ESC is especially designed for use with the TBLM series of Tamiya Brushless Motors (Sensored-Type, 10.5T, 12.5T, 14.5T, 16.5T). It is also compatible with brushed motors (Normal Type 540 and Sports-Tuned Motors 25 Turn or higher).

SUPER TIGRE G 51. Precision Made, Heat Treated, Low Tension Piston Ring to fit.

The double waterproof ring design makes the waterproof shell deeper and deeper up to 60M. The waterproof case is more secure with a screw-twisted locking waterproof case. The waterproof case can be protected from scratches without using a waterproof case.

Eachine ROTG01 UVC receiver is a new receiver that you can connect to your smart phone directly instead of heavy monitor and good for those who feel dizzy when wear FPV goggles. It has low latency around 100ms. 150CH auto search allows to cover all 5.8G frequency bands.

Fitting : Futaba.

ESC output red and black lines were connected to the car 540 motor red and black lines. (Or connect standard DC battery plug Daejeon male plug/T plug/banana plug). Suitable for model car, boat. High frequency drive system.

Outside Diam: 12mm. Width: 12mm. We are open Mon-Sat 8am - 5pm.

<p>DJI inspire 1 pro TB47. Condition is used well looked after some light usage marks. working battery. Any Questions please just ask.</p><br><p>Ship as soon as payment is received</p>

This servo is 180° capable but needs the required signal indicated above to do it (PWM 500-2500μs). When installed in a normal RC car it will typically do the normal 60° that the receiver commands so it's suitable to RC cars but also robot arms for example that require the 180° of actuation.

Designed For Eachine E58. Capacity: 1200mAh. weight : 25g each battery. if can fly about 6 minites than original batery. Complaint handling.

Rear Wing For Losi 5ive - T.

<li>  </li> <li> </li> <li>Features:</li> <li> </li> <li> <ul> <li>Color: white</li> </ul>​</li> <li> <ul> <li>Material: metal</li> </ul>​</li> <li> <ul> <li>Suitable for 1/10 RC Crawler Axial SCX10 II D90 CC01 D110</li> </ul>​</li> <li> <ul> <li>Fits 12mm hex hubs and most 1.9 inch size tires</li> </ul>​</li> <li> <ul> <li>Strong and durable</li> </ul>​</li> <li> <ul> <li>Easy to install</li> </ul>​</li> <li> </li> <li> </li> <li>Packing includes:</li> <li> </li> <li>2 x 1.9 inch wheel rim (PCS)</li> <li> Brand Unbranded MPN Does Not Apply Type Wheel Rim Compatible Scale 1/10 Compatible Brand For RC Crawler Traxxas TRX-4 Axial SCX10 CC01 Material Metal EAN Does not apply</li>.

Tamiya 18T Aluminum Pulley (for TA06 & XV-01), Part No's. 54450 (OP-1450). TA06, TA06 Pro, XV-01, XV-01 Pro, XV-01T, XV-01TC, etc. This precision 18T aluminium pulley features surfaces lined with a high-lubricating coating to improve transmission efficiency and durability when used on the Tamiya TA-06 touring car chassis platform and the XV-01 crossover chassis platform.