Telescope Parts & Accessories

This machine-crafted filter wheel can handle up to five standard 1.25" threaded filters in style. This five-position filter wheel is designed with black anodized, machined aluminum and has T-threads on both sides.

So it really is in 'as new' condition. A few light years later, it's still sat here. . . unused!

Fully adjustable with steel tray. Ideal for lighting etc.more pics to follow.

Type: 4mm Plossl Eyepiece. 1 4mm Plossl Eyepiece. It will bring you impressive scenery. Hope you enjoy your life. Focal Length: 4mm. Lens Material: Optical Glass. If you do not receive our reply within 48 hours, pls.

It also has an extendable barrel to allow the correct focus to be reached. I have had the eyepiece for about 6 months but never used it and it is boxed and in excellent condition.

MA6 - MA25.

Linear Polarization A4 Sheet. Linear Polarization Slide. You have to remove it gently before use. Once removed, the polarizer sheet will be revealed, clean and smooth. IMPORTANT(!). High Contrast Linear Polarizing Film.

(What's new in this update?. 2) Finish the initialization on SynScan. 5) Start observing.

Skywatcher AZ3 Alt-Azimuth mount with aluminium adjustable extending tripod. Includes central accessory tray and horizontal and vertical flexible slow motion cables.

Made in Japan by Nihon Seiko (Unitron maker).

The maker of this "mystery object" is TYPNCT. If the weight is over 2kgs it may be best to sent more than 1 parcel.

Made with simple design but astonishing good quality materials and finishing. It's made to be easy wrapped and hold in one place.

1 x Phone Holder. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. Size: 73x32x150mm.

Micron MT9M034 sensor - chip size 4.83mm x 6.63mm (1280 x 960). Pixel siz 3.76 um square.

This is the more expensive CCD version which has built in IR cut to stop star bloating.

Hopefully you know what you're looking at.

It's all contained in an aluminium case, with keys! So it really is in 'as new' condition. A few light years later, it's still sat here. . . unused!

The set contains the following Skywatcher Super 25mm Wide Angle, Long Eye Relief Achromat Eyepiece. Skywatcher Super 10mm High Power Achromat Eyepiece. Skywatcher Moon Filter.

Welcome to my auction for my Skytracker mount. Works really well, and the Polar Scope is really easy to use to align it before starting. Don’t take my word for it though , see these reviews : https://www.youtube.com/watch?v=iXVVBlvlhbE https://telescopereviewer.com/ioptron-3302b-skytracker-camera-mount-review/ https://photography-on-the.net/forum/showthread.php?p=17328366&i=i35645729 https://www.amazon.com/iOptron-3302B-SkyTracker-Camera-Mount/product-reviews/B00EFRN1GE

This is a set of 8 matched 1.25” Super Plossl multi-coated eyepieces each in a strong plastic housing, all secured in a padded, lockable, aluminium carrying case. I am downsizing.

1 X Phone Holder. Color: Black.

Baader Planetarium OIII Visual filter 8nm. Baader part number 2458395.

1 Eyepiece. Focal length of 8 to 24mm allows for expanded magnification options. Fully coated optical lens ensures crisp and clear image quantity. Used to observe landscapes and lunar surfaces, planets, nebulae, clusters, and diffuse nebulae.

BST Starguider 1.25" 8mm 60 degree ED eyepiece. This high contrast makes it a good choice for splitting close binary stars, for examining low contrast lunar and planetary detail, and for finding small and faint planetary nebulae against a truly dark sky background.

This wedge can also be fitted to a tripod with Center bolt, fit scope to wedge using the supplied bolt that fits to bottom centre of scope base, tighten, and polar align, the whole thing can be aligned using the tripod north facing leg for altitude and turning the whole scope and wedge on the centre bolt for azimuth, when aligned tighten centre bolt down tight.

In very good used condition and full working order.

This lets you see a greater area of the sky than you would normally be able see. It is threaded so that it can be attached to other filters if you so desire. We usually get goods on the way within 24 hours (weekends excepted).

The structure of the optical system: PLOSSL Eyepiece. Coating: optical lenses, fully coated, high-definition. Fully multi-coated glasses for excellent image contrast and light transmission. Foldable goggles for wearing glasses use.

Once the red dot is exactly over the star or planet it should be exactly in the centre of your eyepiece view. Now set your scope up as normal but put the red dot finder on instead of the usual optical finder.

80mm Objective lens in cell with sliding lens hood.

The eyepiece is in excellent condition. It has a field of view of 60 degrees.

1 x DN40cmDew Heater Strip. Cloth covered with foam insulation on outer side for maximum efficiency and performance. It's easy. Electrical interface: USB Power Bank is required for 2A. A:Overseas Warehouse Local Dispatch.

  Get your mobile phone into image capturer in distant, tiny world. Explore the nature of the world easily through your screen. This universal eyepiece adapter is perfect for connecting a cell phone, a digital camera or small camcorder to a telescope, microscope or spotting scope. Simply attach this bracket to a low-to-medium powered eyepiece, attach your phone to the platform, and centre the camera lens over the eyepiece, using the view in the LCD display as your guide.   Features:   100% Brand New and Never Used Clamp accepts eyepieces with an outside diameter of approx. 27~50mm.

A great compliment for mobile phones Get close sharp pictures with this great telescope So simple to use, just clip on From a non smoking clean home Uk bids only please Please pay within two days I post daily Monday to Friday except Saturdays Thank you for looking

2、it doesn't work on a rifle scope because it mounts too close to the eyepiece. 1 x Smart Phone Adapter. Or it depends(except US).

Very useful for most planetary targets and excellent on the lunar surface too. No Reserve.

Celestron f/6.3 Reducer/Corrector. Features - Celestron f/6.3 Reducer/Corrector. Kit Contents. 5-14" Catadioptric Scopes.

Easy to use: simply insert the eyepiece into Barlow lens, and then insert the Barlow lens into the scope. 1 0.96" 3X Barlow Lens. Lens material: Optical glass. Interface: approx. Sleeve material: Plastic.

One heater strip to warm them all! Dew lens heater x 3. Bullet Point - Heater length: 7.48in. - Heater material: Carbon fiber heating coil. laser light. Great idea for warming up water bottle, drink cup, feeding bottle or anything needs keep warm.

Focal Reducer: 0.5X. 1 x Focal Reducer. Material: Aluminium Alloy. Good quality aluminum alloy housing is durable for years of use. If you do not receive our reply within 48 hours, pls. If you are satisfied with our service, pls.

Suitable for Celestron C8/C8HD/C925/C11HD, SKYRVER 80ED/102ED/130APO, SKYRVER 100ED and many other binoculars. Suitable for Celestron C8/C8HD/C9 25/C11HD, SKYRVER 80ED/102ED/130APO, SKYRVER 100ED. If you do not receive our reply within 48 hours, pls.

1 T-Ring for Canon EOS. 1 Extension Tube. 1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.