Vehicle Gasket Makers, Removers & Sealers

Product categories include gasket makers, sealants, hand cleaners, threadlockers, adhesives, cleaners, repair kits, and lubricants. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake & Parts Cleaner.

Heat resistant red rtv silicone (21g) tube. Withstands temperatures up to 350 degree Celsius.

JLM AIR INTAKE & EGR CLEANER. Dissolves carbon deposits, gums & varnish build up. Quickly cleans EGR valve, air intake system, manifold & inlet valves. Remove the hose between turbo & air intake cleaner.

Three Bond 1215 Silicone Gasket. Three Bond 1215 silicone is OEM approved. Solvent free, non-acid liquid gasket on RTV-Silicone basis (Room Temperature Vulcanising) with low odour.

JLM PAT FLUID REFILL HOSE KIT. ESSENTIAL WHEN TOPPING UP PAT FLUID. 1 LITRE PAT FLUID HOSE KIT. 1 LITRE PAT FLUID AVAILABLE. 5 LITRE PAT FLUID AVAILABLE. DIRECT FIT FOR JLM 1 LITRE REFILL BOTTLE.

Granville Blue Gasket Sealant is a new technology sealant which is free from the solvent problems of other formulations and stays flexible when cured. Directions for Use Remove cap from tube and pierce end.

Pierce top of tube with back of cap and apply a thin even coat of Ultra Rubber Gasket Sealant & Dressing to all sides of gasket. Align gasket, press into place and assemble. Formulated specially for rubber gaskets, it conditions gaskets for longer life and seals potential leak paths.

Permatex 81950 Ultra Slick Engine Assembly Lube, 4 oz. bottle fromASVELA. Suggested Applications: Engine bearings, camshafts, lifters, valves, guides, and rocker shaft assemblies. Ultra Slick™ adheres to component surfaces to prevent scuffing and galling during initial start-up.

Unlike inferior coolant products, K-Seal mixes with all types of antifreeze and coolant. K-Seal is easy to use. Shake the bottle; add it to the cooling system and go.

The original quality formula, a hard setting, economical sealant. Seals all common gasketing materials in low temperature and low pressure applications. This product may be covered by one or more United States or foreign patents or patent applications.

Anabond 696 liquid grey sealant 30 grams. This is a quality gasket sealant and is used by top manufactures throughout the trade. Highway Motorcycles.

Anti Seize Copper Grease Spray. Protects Nuts and Bolts From Corrosion.

After using JLM Turbo Cleaner, dirt and soot are gone. The turbo can boost engine performance again and the air-fuel ratio is ideal. JLM TURBO CLEANER. JLM Turbo Cleaner is very easy to use, the liquid can simply be added to the diesel in the fuel tank.

Temperature stability:after full hardening -50°C to 180°C. ELRING Dirko 036.166 sealing compound - 100g / 70ml. ELRING Dirko 036.166 sealing compound (1-Pack)

Granville Blue Gasket Sealant is a new technology sealant which is free from the solvent problems of other formulations and stays flexible when cured. Resists petrol, steam, antifreeze, oils, common solvents and most chemicals.

LOCTITE SI 5910. We will always help you to have a 100% positive happy buying experience. For use with flexible flanges.

HIGH TEMPERATURE SILICONE 350C  Color BLACK 21ml High quality black silicone withstands highest temperatures up to 350C. Replaces O.E.M. silicone gasketing material. Special SENSOR SAFE formula will not harm lambda sensors or catalytic converters. May be used for all types and models of cars, trucks, tractors, buses. Resists oil, water, anti-freze and maintenance fluid.  Directions for use Apply the sealant to the cleaned and degreased surface and smooth with a spatula oiled with e.g. silicone oil. Expiry date 12.2022

Original Ref Number: 652950. VAUXHALL OPEL ASTRA INSIGNA SIGNUM VECTRA ZAFIRA. OIL DRAIN SEALING PLUG.

Black Saratoga Silicone Sealant.

K-Seal ULTIMATE 472ml. K-Seal is a one-step permanent multi-purpose system for coolant leak repair. It will permanently repair leaks in the head, head gasket, block, radiator, heater matrix, freeze plug and water pump casing in any water cooled petrol, diesel or LPG car, motorcycle, van or truck.

PAT FLUID 5x 1L DPX 42/176 EOLYS.

LOCTITE SI 5920. LOCTITE SI 5920 is a low strength, silicone-based gasketing product. We will always help you to have a 100% positive happy buying experience. It is used on flexible flanges with machined or cast surfaces and is particularly suitable for high temperature applications up to 350°C.

K-Seal is a one-step permanent multi-purpose system for coolant leak repair. It will permanently repair leaks in the head, head gasket, block, radiator, heater matrix, freeze plug and water pump casing in any water cooled petrol, diesel or LPG car, motorcycle, van or truck.

Henkel Loctite SI 5660 Premium Grey Silicone. This 100ml tube of premium grey silicone sealant is for flanges of any size and shape. Typical uses include water pump, thermostat, oil sump, valve cover, inlet manifold etc.

MULTI PURPOSE SEALANT IDEAL FOR SEALING WINDSCREEN GLASS ELECTRICAL CONNECTIONS AND AS A REPLACEMENT GASKET

CLEAR INSTANT GASKET REPLACES PRE-FORMED GASKETS

Do not dry on exposure to air Using anaerobic thread adhesive eliminates the need for using seals for fastening screws. Maximum size of thread to use on : M40. Irreplaceable wherever connections are exposed to vibration, shock.

ICP Grey Sealant. We are specialists in Subaru UK & JDM Models, but cater for all Japanese car manufactures like Nissan, Toyota, Mitsubishi etc. Withstand Temperatures up to 400C. Any item that has been fitted or used.

1 x 70ml TUBE OF HIGH TEMPERATURE 300 ºC SILICONE ADHESIVE SEALANT - "Liquid Gasket". After cure creates100% rubber which leaves flexible for the whole period of its use at temperatures - 60ºC up to up to 300ºC.

After cure creates100% rubber which leaves flexible for the whole period of its use at temperatures - 60ºC up to up to 300ºC. Replaces different kind of gaskets resistant to UV radiation, changing weather conditions, oils, cooling liquids, petrol, and water.

Hylomar hyloclean 400ml cleaner spray Product information HYLO®CLEAN is a specially blended cleaning fluid that is highly effective at removing used Hylomar jointing compound from disassembled joint surfaces. The unique mix of solvents also make it perfect for cleaning and degreasing surfaces prior to use with any of Hylomar’s range of adhesives and sealants. HYLO®CLEAN is also very effective at removing uncured anaerobic, uncured silicone and uncured epoxy products.

® Indian Head. The original quality formula, a hard setting, economical sealant. Seals all common gasketing materials in low temperature and low pressure applications.

K2 ProLokHigh Strength Anaerobic Thread Nut Bolt Locker 6ml. K2ProLokHigh Strength Anaerobic Thread Nut Bolt Locker 6ml. Using anaerobic thread adhesive eliminates the need for using seals for fastening screws.

Elring Dirko HT 310ML. Dirko HT cures by reacting with the humidity in the air. This does not include Channel Islands, Northern Ireland and Scottish Highlands. Oil, grease, coolant, UV radiation, cold and hot water, salt water, detergents, weak acids and lyes, etc.

• Neutral Cure, Low Odour. • Super High-Temp: Effective Up to 700°F (371°C).

We are the only official, authorized distributor of products made by Technicqll in United Kingdom. 1 x 20g SEALANT FOR COOLERS ENGINE BLOCKS AND HEADS etc. Designed for fast removing leakages in coolers, engine blocks and heads.

Compatible with all types of type of steering fluid.

After cure creates100% rubber which leaves flexible for the whole period of its use at temperatures - 60ºC up to up to 300ºC. Replaces different kind of gaskets resistant to UV radiation, changing weather conditions, oils, cooling liquids, petrol, and water.

Compatible with all types of type of engine oils.

MANNOL 9916 Gasket Maker Transparent. MANNOL Gasket Maker Transparent is a high-quality single-component silicone sealant that vulcanises into silicone rubber at room temperature. It has excellent adhesive and bonding properties.

1 x 70ml TUBE OF HIGH TEMPERATURE 300 ºC SILICONE ADHESIVE SEALANT - "Liquid Gasket". After cure creates100% rubber which leaves flexible for the whole period of its use at temperatures - 60ºC up to up to 300ºC.