Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
Postage:
FreeStandard Shipping.
Located in: Flat Rock, North Carolina, United States
Delivery:
Estimated between Wed, 6 Aug and Sat, 9 Aug to 94104
Delivery time is estimated using our proprietary method which is based on the buyer's proximity to the item location, the delivery service selected, the seller's delivery history and other factors. Delivery times may vary, especially during peak periods.
Returns:
30 days return. Buyer pays for return postage. If you use an eBay delivery label, it will be deducted from your refund amount.
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, 65th Anniversary Edition"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2006
Jeep
Wrangler
Rubicon Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Rubicon"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2006
Jeep
Wrangler
SE Sport Utility 2-Door
2.4L 148Cu. In. l4 GAS DOHC Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, SE"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2006
Jeep
Wrangler
SE Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, SE"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2006
Jeep
Wrangler
Sport Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Sport"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2006
Jeep
Wrangler
Unlimited Rubicon Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Unlimited Rubicon"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2006
Jeep
Wrangler
Unlimited Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Unlimited"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2006
Jeep
Wrangler
X Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, X"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2005
Jeep
Wrangler
Rubicon Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Rubicon"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2005
Jeep
Wrangler
SE Sport Utility 2-Door
2.4L 148Cu. In. l4 GAS DOHC Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, SE"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2005
Jeep
Wrangler
SE Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, SE"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2005
Jeep
Wrangler
Sport Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Sport"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2005
Jeep
Wrangler
Unlimited Rubicon Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Unlimited Rubicon"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2005
Jeep
Wrangler
Unlimited Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Unlimited"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2005
Jeep
Wrangler
X Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, X"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2004
Jeep
Wrangler
Rubicon Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Rubicon"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2004
Jeep
Wrangler
SE Sport Utility 2-Door
2.4L 148Cu. In. l4 GAS DOHC Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, SE"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2004
Jeep
Wrangler
Sahara Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Sahara"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2004
Jeep
Wrangler
Sport Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Sport"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
2004
Jeep
Wrangler
Unlimited Sport Utility 2-Door
4.0L 242Cu. In. l6 GAS OHV Naturally Aspirated
Note:"For fabricators & Susp system builders. Currie Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint rod ends are made w/a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, & is impervious to weather. The special center ball is heat-treated steel for extra strength, features a .500" Thru bolt hole, & a 2" mounting width. The outer shell is .180" DOM tubing, & is fitted w/a zerk fitting for Ext greasing. Retaining washers are heat-treated steel.Details:2" Johnny Joint Rod End - Extly GreasedOffers 30 Degrees Of Unrestricted Movement In Any Direction2" x .500" Heat-Treated Steel Ball Encased w/Tough 88 Urethane2" Mounting Width w/.500" Thru Bolt HoleOuter Shell is .180" D.O.M. Steel & Fitted w/Zerk FittingBare FinishSold As Each"; 4WD, Unlimited"
PartType:Steering Tie Rod End
Mfrlabel:2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Quantity Required:1
Portions of the information contained in this table have been provided by cycleanything
Item specifics
Condition
New
MPN
CE-9112P-12
Model
CE-9112P-12
UPC
817783007375
About this product
Product Identifiers
Brand
Currie
Manufacturer Part Number
CE-9112P-12
eBay Product ID (ePID)
251031089
Product Key Features
Type
Steering, Gear and Related Components
Additional Product Features
Notes
Description--2 Inch Johnny Joint Rod End Externally Greased .5 Inch Thru Bolt Hole
Sub Type
Steering Tie Rod End
Item description from the seller
Seller business information
I certify that all my selling activities will comply with all EU laws and regulations.
We sell auto, motorcycle, off-road, and power sport parts.We are authorized dealers for everything we sell.We sell auto, motorcycle, off-road, and power sport parts.We are authorized dealers for everything we sell.
We sell auto, motorcycle, off-road, and power sport parts.We are authorized dealers for everything we sell.We sell auto, motorcycle, off-road, and power sport parts.We are authorized dealers for everything we sell.
